The completion of the Ponte da Inte-gração Brasil-Paraguai, the friendship bridge linking Brazil and Paraguay, represents a dream come true for the region that has been 40 years in the making. The long-awaited second connec-tion between the two countries has a main span of 470 m, making it the long-est in Latin America. A project of this size required suitably large expansion joints, which were delivered by the structural protection specialists at MAURER.

The Ponte da Integração Brasil-Paraguai is an asymmetric cable-stayed bridge with a total length of 760 m. The pylons reach up 190.17 m in Brazil and 185.04 m on the Paraguayan side. The bridge crosses the Paranà river and connects the Paraguayan city of Presidente Franco with Foz do Iguaçu in Brazil.

The bridge has an average width of 17.8 m, with lanes measuring 3.6 m wide in each direction. It also has a 3-m-wide hard shoulder and a pavement measuring 1.7 m in width. It will relieve the strain on the friendship bridge inaugurated in 1965 between Foz do Iguaçu and Ciudad del Este. This older bridge will then be closed to heavy goods vehicles, which will only be allowed to use the new bridge.

The record span required the largest expansion joint constructions ever built in either country. Fitted at the abutments at both ends of the bridge, these flexible elements compensate for movements that the bridge makes due to traffic, wind and temperature fluctuations in relation to the mainland. Expansion joints also ensure that vehicles can drive across this juncture unimpeded, regardless of the transition construction’s displacement. The joints are installed perpendicular to the direction of travel.

Bridges in both countries are usually built with simple rubber profiles and narrow rubber expansion joints. But this was not sufficient for the friendship bridge. The project called for sophisticated, low-maintenance swivel joist expansion joints. MAURER Munich therefore collaborated closely with local subsidiary MAURER do Brasil to provide the contractor with technical support.

What makes the swivel joist expansion joints special is the way they allow for movements in all directions without damage or significant resistance. They permit lateral, longitudinal and vertical movements in relation to the direction of travel, as well as any rotations. The profiles rest on top of the parallel swivel joists, which, with the exception of those at the edges, run at a slight angle to the direction of the road. This spreads the bridge’s tensile and shear movements evenly and without fatigue across the gaps between the profiles. As a result, the expansion joints are set to do their job for at least 50 years.

MAURER installed one each of its DS 640/800 and DS 320/400 expansion joints, allowing compensation for bridge movements of 800 and 400 mm respectively. The components are 13.6 m long and have two footpath sections each measuring 2.3 m. Due to transport limitations, they were delivered in two parts before being welded together under MAURER’s supervision at the end of 2022.

MAURER also supplied 67 elastomeric bearings for the friendship bridge, with dimensions of up to 1,100 x 1,100 x 102 mm. These were all produced by MAURER do Brasil in Sao Paulo.

Construction of the bridge began in 2019. The main bridge section was completed in August 2023, with work on the ancillary structures still ongoing. The bridge is scheduled to be opened to traffic by the end of 2024. The project is being led by the consortium Construbase-Cidade-Paulitec. Three more partners are involved in the cross-border project: the Itaipu Binational hydroelectric power station (a cooperation between Brazil and Paraguay), the Brazilian state of Paraná, and the Paraná Road Authority (DER-PR), which monitors all road construction projects in the state.

Fields marked with a red asterisk * must be completed for the message to be sent.